Cypher 1" Tubular Webbing – 30 ft Anchor and Sling Webbing

Cypher 1″ Tubular Webbing comes in a 30-foot length that you can cut and tie for anchor systems, rappel anchors, and knotted slings. Cypher builds its tubular webbing to be the strongest available, with no more than three splices per spool and no less than 5 yards between each splice.

Cut it to length and tie it for the anchor or sling you need. Cypher lists a 4,000 lb (17.8 kN) strength rating for the 1-inch width, and the 1-inch webbing is made in the U.S.A. Spools may contain one or more splices. As with all anchor and climbing gear, use it only if you are trained in its proper use and inspect it before every use. Choose blue, red, or green.

Key Features

• 30 ft Length: Enough to build slings and anchors.

• 1-Inch Tubular Webbing: Standard width for anchor building.

• 4,000 lb Strength Rating: Cypher’s listed strength for the 1-inch width (17.8 kN).

• Splice Limits: No more than three splices per spool and at least 5 yards between splices.

• Made in the USA: The 1-inch width is made in the U.S.A.

• Three Colors: Blue, red, or green.

What’s Included

• 30 ft of 1-inch tubular webbing

Specifications

• Width: 1 in

• Length: 30 ft

• Construction: Tubular

• Strength Rating: 4,000 lb / 17.8 kN (manufacturer’s figure)

• Colors: Blue, red, or green

• Made In: USA